Cambridge Audio one plus User Manual Page 35

  • Download
  • Add to my manuals
  • Print
  • Page
    / 40
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 34
752BDazur
ENGLISH
35
4. Internet Connection
To select the internet connection type. The available options are:
Ethernet (default) – Connect to internet through the Ethernet cable,
please refer to the connection instructions of the manual. Choosing this
will make the "Wireless Setting" option grey and un-selectable.
Wireless – Connect to internet through the external wireless adaptor,
please refer to the connection instructions of the manual. Choosing
"Wireless" will start the wireless setting procedure, and also make the
"Wireless Setting" option in the next row selectable.
Off – Internet access is prohibited. This will make all the remaining
options in Network Setup screen grey and un-selectable.
5. Wireless Setting
Note: The 752BD includes a wireless adaptor. Other wireless adaptor
will not work.
To start the wireless setting procedure. The wireless setting procedure
can be started either by selecting the "Wireless Setting" option, or by
selecting "Wireless" in "Connection Method" option, the procedure is
described as follows:
The player rst searches for the last successful wireless settings. If any
exist, a message will pop up as below:
Use Previous – To use the last successful wireless setting. A summary of
the previous wireless setting will pop up showing information like SSID
(Service Set Identier), Security Mode and Security Key (in asterisk *).
Then a connection test will be automatically performed and the test
result shown on the screen.
Start NewTo start a new wireless conguration. The 752BD supports
three wireless conguration methods and the available options are:
Scan – To scan for available wireless networks. The player automatically
scans for any available wireless networks nearby and the search results
are listed in a window. You can press the / buttons to highlight
a network then press the Enter button to select it. If this network is
secured, you need to input the security key using the remote control.
Then a connection test will be automatically performed and the test
result is shown on the screen.
Manual – To manually set the information for a wireless network. You
need to use the remote control to input the SSID, select the Security
Mode and input the Security Key. Then a connection test will be
automatically performed and the test result is shown on the screen.
WPS – To start the Wi-Fi Protected Setup. 752BD supports the WPS
standard to provide an easy and secure establishment of a wireless
home network. If you have a router/wireless access point that also
support WPS. The available options are:
PINTo congure the WPS using a Personal Identication Number.
The player will generate a PIN and you need to input it into the
software control panel of your wireless router or access point. Please
follow the on-screen instruction.
PBC - To congure the WPS using Push Button Control. You need to
push a PBC button on your wireless router or access point to initiate
the wireless connection. Please follow the on-screen instruction.
Note:
SSID is short for Service Set Identier. It is an identier for each wireless
router or access point, and is also referred as a network name.
WPS is short for Wi-Fi Protected Setup (WPS). It is the latest standard
for easy and secure wireless home network conguration. It is also
named Wi-Fi Simple Cong. To use WPS, a WPS compatible router or
access point is required.
6. IP Setting
To determine how the player obtains its IP address. The available options
are:
Auto (DHCP) - The player automatically obtains its IP address information
using DHCP (Dynamic Host Conguration Protocol). This is the default
setting. In most cases, automatic IP conguration is best and requires
no user intervention.
Manual – Manually enter the numeric IP address information. For more
information on how to manually congure the Internet connection and
what values to use, please consult your broadband router/modem
instruction manuals or call your Internet service provider.
IP Address – The Internet Protocol address of the player. When
"IP
Conguration
" is set to "Auto (DHCP)", the value displayed here is
obtained using DHCP and cannot be changed.
Subnet Mask – Each IP address has an associated subnet mask. It is
used by the player to decide whether to route network trafc through
the router or directly to another device on the same network. When
"IP
Setting
" is set to "Auto (DHCP)", the value displayed here is obtained
using DHCP and cannot be changed.
Gateway – The IP address of the router. It is also called "default gateway"
or "default router". When "IP Setting" is set to "Auto (DHCP)", the value
displayed here is obtained using DHCP and cannot be changed.
DNS 1 The IP address of the rst (primary) DNS (Domain Name
System) server. DNS is the mechanism to translate human-readable
addresses to numeric IP addresses. When "IP Setting" is set to "Auto
(DHCP)", the value displayed here is obtained using DHCP and cannot
be changed.
DNS 2 – The IP address of the second (secondary) DNS server. When
"IP Setting" is set to "Auto (DHCP)", the value displayed here is obtained
using DHCP and cannot be changed.
7. Proxy Setting
To congure the proxy server settings. A proxy server works as an
intermediary for network communication between clients and other
servers, which can provide benets like security, anonymity, speedup or
circumventing regional restrictions.
On – To access the Internet via a proxy server.
Proxy Host: To enter the proxy host name using the remote control.
Proxy Port: To enter the proxy host port number using the remote
control.
Off (default) – Do not use a proxy server.
8. Connection Test
To test the Internet connection. It is recommended that you test the
connection when you initially connect the player to the Internet, or
whenever changes to "IP Setting" and other network parameters are
made.
Page view 34
1 2 ... 30 31 32 33 34 35 36 37 38 39 40

Comments to this Manuals

No comments