Cambridge Audio DacMagic Plus User Manual download pdf (Page 29)

azur DacMagic Plus

ENGLISH

D. On successful pairing, the BT100s LED goes off for a second or two, then triple ashes quickly.

The LED then goes off and only lights up in the future when you are playing audio via Bluetooth.

E. To play back via a paired Bluetooth device, simply select the BT100 on that device and start

playing. The BT100 LED lights up constantly when streaming SBC or on and icks off every 2 seconds

when streaming apt-X.

Notes:

- You can pair to more than one source up to a maximum of 8 sources at any time. Pairing to a 9th

device will cause the rst one to be forgotten and so on. However as you would expect the BT100

can only play back from one of these sources at a time.

- When you have nished playback many sources keep the Bluetooth link active for a time unless

you actively tell them to stop by deselecting playback via the BT100 (do not unpair as this is not

necessary).

This can prevent another source to be able to access the BT100.

To immediately use another source, simply deselect the BT100 for playback on your rst source

device before starting up on a second.

- Some devices stream empty data all the time even when paused or stopped. These devices will

cause the BT100s LED to be on even if playback is currently stopped or paused.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 39 40

No comments

Cambridge Audio DacMagic Plus User Manual Page 29