Cambridge Audio one plus User Manual download pdf (Page 19)

752BDazur

ENGLISH

As well as normal CD’s, SACD’s, DVD’s and BD’s the 752BD can play

some music, movies and photo les either from optical datadiscs (such

as CD-R, DVD-R etc.) or external memory such as USB ash-drives/

thumb-drives or hard-drives.

Connecting a USB Drive

The 752BD is equipped with three USB 2.0 ports, one on the front of the

unit and two on the back. You may use any USB port to plug in a USB

drive loaded with digital music, movies and photo les.

The USB ports are rated to provide a maximum of 5V, 1A power to the

attached device. This is usually sufcient to bus power (i.e. self power)

USB ash drives and ash memory card readers, but may not be

sufcient for all USB hard disks.

Note:

• This unit supports Mass Storage Class Bulk Transport devices only.

Most USB thumbs drives, portable hard disk drives and card readers

conform to this device class. Other devices such as MP3 players,

digital cameras, and mobile phones that include their own memory

management may not be compatible.

• Supported USB drives must be formatted with the FAT (File Allocation

Table), FAT32 or NTFS (New Technology File System) le system.

• In some cases, an incompatible device may cause the player to stop

responding. If this occurs simply turn off the power, remove the device,

and turn the player back on.

• The player accesses the USB drive in read-only mode. In order to

minimize the risk of data corruption, it is recommended that you only

unplug the USB device when playback has completely stopped.

Network Media Playback

The 752BD can remotely Playback music, photos, and video les stored

on media devices that are connected to the same home net work. Set

the My Network selection to On in the Setup Menu. Press the

button

on the remote to bring up the Home Menu, select the Network icon

and press Enter button to show the list of available servers and shared

folders. In some cases, you might need to disable your rewall to allow

the 752BD to see your devices.

The 752BD can perform Network Playback in one of the following three

ways:

• As a digital media player (DMP): the 752BD can actively search, access

and pull content from media servers on you network.

• As a digital media renderer (DMR): the 752BD plays content received

(‘pushed‘)from a digital media controller (DMC). A DMC-capable UPNP/

DNLA media server is required. Plus the control APP you wish to use

which must be connected to the same network as the server and

752BD. Refer to the server and APPs respective user instructions for

correct conguration and operation.

• Accessing a SMB/CIFS client: the player can directly access les

shared by computers through SMB/CIFS clients over the network, as

if accessing a local USB hard drive. Most computers especially those

installed with Windows, already have an SMB client embedded. Please

refer to your respective OS instructions to set up the SMB/CIFS shared

le/folder.

Note:

• A NAS is a network attached storage device that provides le-based

data storage services to other devices on the network. Commercial

products are available that often incorporate a UPnP/DNLA Server.

• SMB (Server Message Block) or Cifs (Common Internet File System) is

mostly known as the folder sharing method of Microsoft Windows. It

does not require an extra media server or perform any media format

transcoding.

• Compatibility with local network sharing hardware/software is on a

best effort basis with no guarantee, due to variations in NAS devices,

media servers and their congurations

Media playback from USB Devices

TV system selection

The 752BD can be set to output all video as PAL or NTSC or output

the video in the same format it was recorded in (Multi). Some TVs only

support PAL or NTSC and not both so forcing the output type to one or

the other can be useful.

Press the TV Type button on the remote control to cycle the video output

to PAL, NTSC or

"Multi" system. The TV screen displays the selected

system name.

Some points to keep in mind:

• When the video output is set to PAL or NTSC, the player will convert the

disc content if different to the selected system.

• When the video output is set to

"Multi", the player will not perform system

conversion and will output the video in its native format on the disc. The

"Multi" mode should only be used if your TV supports both NTSC and PAL

systems.

• Some TV sets only support one of the PAL or NTSC systems. If the

wrong output is selected, the TV may not display a picture. In this case

keep pressing the TV Type button until a supported system is selected.

• The output system selected with the TV Type button will be remembered

when the player is turned off. The output system selection can also be

done by setting the

"TV System" item in the "Video Setup" section of

the player’s Setup Menu.

Viewing pictures on DVD-Audio discs

Some DVD-Audio discs contain static pictures, such as photos of the

band or narration of the album. When a DVD-Audio track is playing, you

may use the Page  and Page  buttons to select the picture.

Note: Availability of static pictures depends on the DVD-Audio disc.

Pure Audio mode

You can enjoy higher quality audio by turning off the video processing

and front panel display. The Pure Audio mode reduces any potential

interference between the video and audio signals.

1. Press the Pure Audio button on the remote control to turn off video and

enter Pure Audio mode. Video output will be turned off.

2. Press the Pure Audio button again to resume video and cancel Pure

Audio mode.

Note:

• Pure Audio mode is automatically cancelled when the unit is switched

off or when playback is stopped.

• Since HDMI carries audio together with video, the HDMI output cannot

be completely turned off. A black screen (inactive video but sync is still

present) is transmitted instead to minimize any potential interference.

Shufe

When playing a CD or SACD, press the Blue button on the remote control

to activate the Shufe and Random modes. Each press of the Blue

button switches the playback mode in the following sequence: Shufe

, Random and Normal.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 39 40

Comments to this Manuals

No comments

Cambridge Audio one plus User Manual Page 19

Comments to this Manuals

Related products and manuals for DVD players Cambridge Audio one plus