Cambridge-audio DR30 User Manual download pdf (Page 6)

Ventilation

IMPORTANT - The unit will become hot when in use. Do not stack multiple units on top

of each other. Do not place in an enclosed area such as a bookcase or in a cabinet

without sufficient ventilation.

Ensure that small objects do not fall through any ventilation grille. If this happens,

switch off immediately, disconnect from the mains supply and contact your dealer for

advice.

Positioning

Choose the installation location carefully. Avoid placing it in direct sunlight or close to

a source of heat. No naked flame sources, such as lighted candles, should be placed

on the unit. Also avoid locations subject to vibration and excessive dust, cold or

moisture. The unit can be used in a moderate climate.

This unit must be installed on a sturdy, level surface. Do not place in a sealed area

such as a bookcase or in a cabinet. Any space open at the back (such as a dedicated

equipment rack) is fine however. Do not place the unit on an unstable surface or shelf.

The unit may fall, causing serious injury to a child or adult as well as serious damage

to the product. Do not place other equipment on top of the unit.

Due to stray magnetic fields turntables or CRT TVs should not be located nearby due

to possible interference.

Electronic audio components have a running in period of around a week (if used

several hours per day). This will allow the new components to settle down, the sonic

properties will improve over this time.

Power sources

The unit should be operated only from the type of power source indicated on the

marking label. If you are not sure of the type of power-supply to your home, consult your

product dealer or local power company.

Important safety instructions (continued)

This unit has been designed to be left in standby mode when not in use as this will

increase the life of the unit (this is true with all electronic equipment). To turn the unit

off, switch off at the rear panel. If you do not intend to use this unit for a long period

of time, unplug it from the mains socket.

Overloading

Do not overload wall outlets or extension cords as this can result in a risk of fire or

electric shock. Overloaded AC outlets, extension cords, frayed power cords, damaged

or cracked wire insulation, and broken plugs are dangerous. They may result in a shock

or fire hazard.

Be sure to insert each power cord securely. To prevent hum and noise, do not bundle

the interconnect leads with the power cord or speaker leads.

Cleaning

To clean the unit, wipe its case with a dry, lint-free cloth. Do not use any cleaning fluids

containing alcohol, ammonia or abrasives. Do not spray an aerosol at or near the unit.

Battery disposal

Batteries may contain substances harmful to the environment. Please dispose of any

discharged batteries with due consideration and in accordance with local

environmental/electronic recycling guidelines.

Loudspeakers

Before making any connections to loudspeakers, make sure all power is turned off

and only use suitable interconnects.

Servicing

These units are not user serviceable, never attempt to repair, disassemble or

reconstruct the unit if there seems to be a problem. A serious electric shock could

result if this precautionary measure is ignored. In the event of a problem or failure,

please contact your dealer.

1 2 3 4 5 6 7 8 9 10 11 ... 25 26

Comments to this Manuals

No comments

Cambridge-audio DR30 User Manual Page 6

Comments to this Manuals